Andeli Group Co., Ltd.

Indoor HV load switch and fuse

Indoor HV load  switch and fuse
Product Detailed

Isolate Switch
1.Type:FN5-12
2.Standard|:IEC420 GB3804
3.Main Material:Procelain&Steel

Outline
      FN7——12DRModel Indoor AC HV Load Switch is suitable in 50Hz, rated voltage of 12Kv the three-phase AC power system as the breaking load short-circuit current of the power and used the Closing, until the combination of electrical short-circuit current can be breaking any current can be used as protection purposes.

Installation and use of
      Ambient air temperature    Limit +40°C    Lower limit -25°C
      Above sea level1000m.
      Relative humidity: daily average is less than 95%, on average less than 90%;
      The surrounding air should not be corrosive or flammable gases and water vapor and other obvious contamination;
      Without frequent violent vibration.

Rated parameters

Rated voltage (KV rms)12
Insulation level1min power frequency withstand voltage (KV. RMS)White. Phase to 42Isolation break48
Lightning impulse voltage (KV. a peak)White. Phase to 75Isolation break85
Rated Current(A)400630
Rated thermal current (KA RMS 4S)12.520
Rated dynamic current KA (peak)31.550
Rated short circuit making current (KA peak)31.550

 

Specifications

NameNameAll modelsDSDXLRRAFUse
Grounding switch into the line-sideGrounding switch outlet sideInterlock deviceFuseImpact fuseElectric sub-gate devices
Load SwitchesNon-impact fuseFN7—12————————————Line load switch
FN7—12DSLY——Y——————
FN7—12DXL——YY   
FN7—12R——————Y————Transformer Protection
FN7—12DSLRY——YY————
FN7—12DXLR——YYY————
With impact fuseFN7—12RAF————————YYTransformer Protection
FN7—12DSLRAFY——Y——YY
FN7—12DXLRAF——YY——YY



Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.