- UV Lamp[1]
- Chargers[1]
- Solar Cells[1]
- Circuit Breakers[30]
- Terminal Blocks[1]
- Terminals[4]
- Contactors[30]
- Electrical Plugs & Sockets[11]
- Electronic & Instrument Enclosures[1]
- Fuse Components[4]
- Fuses[7]
- Other Electrical Equipment[10]
- Power Accessories[2]
- Power Distribution Equipment[2]
- Inverters & Converters[3]
- Switching Power Supply[5]
- Uninterrupted Power Supply (UPS)[5]
- Voltage Regulators/Stabilizers[12]
- Relays[27]
- Micro Switches[2]
- Other Switches[15]
- Push Button Switches[1]
- Rotary Switches[4]
- Toggle Switches[1]
- Wall Switches[2]
- Other Wires[2]
- Cable Glands[5]
- Wiring Ducts[4]
- Diodes[1]
- Rectifiers[1]
- Thyristors[2]
- Insulation Materials & Elements[2]
- Other Electronic Accessories[2]
- Resistors[1]
- Solar Chargers[1]
- Food Waste Disposers[1]
- Starters[2]
- Energy Saving & Fluorescent[3]
- LED Bulbs & Tubes[1]
- Emergency Lights[8]
- LED Lamps[30]
- Other LED Lighting[1]
- Camping Lights[1]
- Street Lights[1]
- Floor Lamps[1]
- Other Lights & Lighting Products[1]
- Arc Welders[13]
- Other Welding Equipment[3]
- Counters[2]
- Clamp Meters[1]
- Current Meters[1]
- Energy Meters[10]
- Frequency Meters[1]
- Multimeters[1]
- Power Meters[1]
- Voltage Meters[2]
- Other Measuring & Analysing Instruments[1]
- Temperature Instruments[1]
- Testing Equipment[7]
- Timers[3]
- Alarm[7]
- Locks[1]
- Other Police & Military Supplies[1]
- Traffic Light[2]
watt-hour meter
On the basis of round meter developed by America GE Company, through improvement in design
DSR01 and DSR02 and DD1356 types single-phase watt-hour meters are of inductive types, used for measuring the active electrical energy of single-phase AC line whose reference frequency is 50(60)Hz. The meters should be fixed installed indoors (outdoors), the applicable environmental temperature is 10 -50, relative humidity not exceed 85%, the ambient air should be free of corrosive gas, and the products should be kept away from dust, salt fog or condensation.
The technical indexes of watt-hour meter are in accordance with GB/T15283-1994, IEC521-1998 and ANSI C12.1-2001. The products not only have the advantages of FD type series, but also have the outline and wiring modes of the Occident conventional types, they can be conveniently wired in single-phase two-wire and single-phase three-wire lines, and have a good sale in the international market.
Structural features:
Base shell: polycarbonate injection, good insulation, and reliable installation;
Bed frame: aluminum-nickel-cobalt damping magnetic steel and silicon-aluminum alloy integrated casting, favorable strength and fine stability;
Electromagnetic elements: silicon steel sheet of high magnetic property, current-voltage iron core riveted by quick working punch, extended magnetic pole face, special heat treatment and so on enable the product to have wide voltage range, low power consumption, wide current load, high sensitivity, etc;
Rotating element and bearing: super-high purity aluminum sheet and magnetic bearing with rather low running wear enable the meter to run steadily and start up smoothly without creeping phenomenon;
Label: a special treated aluminum plate with favorable radiation protection capability;
Register: there are drum and pointer two types. It adopts microdiecast and casting plastic technologies, the register runs flexibly, with low frictional moment and stable running;
Shell: glass shell with super-high transparency. Technical parameters
